FAQ's

Your Honda Mixer may not start due to the oil level in your engine, check your engines oil level in accordance with the below.

Click Play below, to see how to fill your Honda Mini 150 with the correct oil level.

Where can I purchase cement mixer spare parts from? 
You can order all Altrad Belle spare parts online or direct by the following

Altrad Belle Parts Centre,
Tel: 01298 84606 opt 1

Email: spares@altrad-belle.com

Online 365 Days a year 24 hours a day. 
Web: www.Altrad-Belle247.com

Mini 150 Up to August 2006 - EP90 gear oil

Mini 150 From August 2006 - Silkgear 220 synthetic oil

Maxi - Total transmission 75w 90 synthetic oil

Premier XT - Total transmission 75w 90 synthetic oil

This could be related to two things: - Incorrect lead length or incorrect volt supply.

230v Mini 150 – Your lead length should be no more than 30 Meters long and 2.5 mm wire size.

110v Mini 150 – Your lead length should be no more than 30 Meters long and 2.5 mm wire size with a transformer size of 2.2 KVA or more.

Warning: - DO NOT use an extension cable between the transformer and the mains power supply

This could be related to two things: -

Fuel - Incorrect, insufficient or contaminated fuel has been used. Unleaded fuel is the recommend fuel to be used in this model of machine.

Low Oil level - Fill until the oil is at the marked level on the dipstick, If your plate still fails to start then check the oil level is high enough, as the oil alert feature on the Honda engines are quite precise.

You can buy a new mixer engine direct from ALTRAD Belle online 365 Days a year 24 hours a day on our spare parts website.
All you will need to do is identify the make and model of your machine.

Click Here for more information.